New Post-checkout ID Verification Technology Has Been Implemented On Our Site. Please note these order based checks are conducted on orders identified by the system and no IDs are physically stored on our servers. Orders requiring an ID check will not be shipped until they clear the check. If assistance is required please contact us via phone or email/chat (for quickest response)
Constructed of 2 layers of 1.75 type 13 webbing Sewn together with 5 rows of bonded 138 nylon thread Additional rigidity and stiffness are added with a propreitary adhesive before sewing
The HSGI Cobra Rigger's Belt is built to withstand the harshest use. Engineered to perform in the most austere environments, the Cobra Rigger's Belt is constructed of 2 layers of Type 13 webbing and is laminated with industrial adhesive to provide additional rigidity and stiffness. Equipped with the quick-release, Integrated D-Ring COBRA buckle, this belt can be donned and doffed quickly, at a moments notice. Built to the same specifications as the standard 1.75 Rigger's belt, the added Velcro-lined interior allows the wearer to use an inner belt, which keeps the belt in place and gear in the correct position.
The Sniper Waist Pack was designed to be attached directly to a belt and developed with direct input from scout sniper instructors. The goal was a product the user could not lose or take off in case of an immediate E&E, giving them enough ammo/food/medical supplies to make it home.End pockets are open end to endThe pockets on each end are magazine pouches capable of holding up to three M4 magazines, MREs or lifesaving equipment Center pocket can be used for a med kit, cleaning kit or almost any other crucial items
Dimensions: 23.25"3.5"x 5".81 lbs Metric: 59.06cm x 8.89cm x 12.7cm, 368.77 gCovered by HSGI's® Lifetime Warranty. Made in the USA.
Adjustable elastic leg strap with integrated rubber gripper material Adjustable belt loop with heavy-duty 2 side-release buckle Entire panel features single-needle edge binding
This small drop leg panel is designed for a wide range of MOLLE holsters and pouches. The back is lined with our signature neoprene padding for enhanced comfort and superior grip.
This versatile mag pouch can hold virtually any high-capacity pistol magazine, submachine gun mag, collapsible baton or large flashlight at 25% the weight of the original. This pouch is as durable as the original and also much more flexible. It can bend and flatten without losing shape or breaking. • Most high-capacity pistol and submachine gun magazines are held securely • Deployed easily and silently on demand• Also fits large flashlights, collapsible batons and other survival equipment• MOLLE version includes HSGI® Clips for attachment to MOLLE or PALS• ABM version can mount to belts up to 2.25"
Dimensions: 1.5"L x 1"W x 6"H, .12 lbs Metric: 3.81cm x 2.54cm x 15.24cm, 54.43 gCovered by HSGI's® Lifetime Warranty. Made in the USA. Patent #9,759,536 High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
.75'' thick and 3.25'' tall Neoprene padding Four suspender attachments Made in the USA
This slim, versatile modular padded belt system adds more options the HSGI padded belt family. All the performance of the original system, but at a lower weight and lower profile. Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
Constructed with a laser-cut Design allows inner belts to be woven under and over the MOLLE panels Rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort
This new version is of HSG's modular padded belt system is constructed with a laser-cut, proprietary 1000D Cordura laminate. This belt's slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. The proprietary neoprene padding creates a gel-like comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
Our Duty line of TACOs® functions the same as the originals, but feature sleeker fronts and hidden bungee, which is woven internally. This pouch will hold most handheld radios and issued personal communications devices. • Mounts to both MOLLE and belts up to 2" with our new HSGI® Universal Clips• Proprietary heavy-duty nylon laminate, shock cord, and webbing provide versatility in size and adjustable retention • Bungee retention tab offers additional retention • Soft sides for a formed fit Dimensions: 3"L x 2"W x 6"H, .281 lbs Metric: 7.62cm x 5.08cm x 15.24cm, 127.57 g
Covered by HSGI's® Lifetime Warranty. Made in the USA.
Constructed with a laser-cut Design allows inner belts to be woven under and over the MOLLE panels Rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort
The Laser Sure-Grip Padded Belt is the newer design of the old class Sure Grip Padded Belt with Laser cut 1000D Cordura to provide the end user with a comfortable, stable and versatile belt system. The laser cutting allows the belt to be ten percent lighter than previous sure grip belts. The Neoprene padding creates a gel like comfort, which eliminates hard points and prevents gear from digging into the hips. To allow gear-specific customization, an inner belt can be woven inside or outside of the MOLLE/PALS webbing platforms to allow the use of MOLLE/PALS for pouches or the belt itself for holsters and other accessories. For added rigidity, the Laser Sure-Grip Padded Belt is assembled with an HPDE stiffener. The Laser Sure Grip Padded Belt is one of the thinnest and toughest belts on the market.
Designed for HSGI belt mount pouch system Constructed of 2 layers of 1.75 type 13 webbing sewn together with 5 rows of bonded 138 nylon thread Layers are laminated with an industrial strength adhesive before sewing
The HSGI Cobra Rigger's Belt is built to withstand the harshest use. Engineered to perform in the most austere environments, the Cobra Rigger's Belt is constructed of 2 layers of Type 13 webbing and is laminated with industrial adhesive to provide additional rigidity and stiffness. Equipped with the quick-release COBRA buckle, this belt can be donned and doffed quickly, at a moments notice. In service with military and police units worldwide, the rigger's belt is a proven piece of gear that no true operator should be without.
Constructed of 2 layers of 1.75 type 13 webbing Sewn together with 5 rows of bonded 138 nylon thread Additional rigidity and stiffness are added with a propreitary adhesive before sewing
The High Speed Gear Cobra 1.75 Integrated D-Ring (IDR) Riggers Belt is sewn with strength and attention to detail, this belt is equipped with the new quick release D-RING COBRA buckle. This buckle is the synergistic hybrid of two gold-standard pieces of safety industry hardware. The Stainless Steel D-ring and the COBRA buckle are both built with strength and durability in mind. The HSGI IDR Riggers belt is constructed of 2 layers of 1.75 Type 13 webbing that is sewn together with 5 rows of bonded 138 nylon thread. Additional rigidity and stiffness are added with a proprietary adhesive before sewing. Buckle color matches belt color.
Neoprene padding creates a gel like comfort Adds a level of grip that is unlike any other belt system on the market Individual PALS platforms allow the inner belt to be woven inside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories
Carry all the gear needed for a day in the field securely on the waist using the Sure Grip Padded Belt from High Speed Gear. Designed to offer all day comfort, the belt features the durability and versatility needed to securely hold the weight of a fully-loaded battle belt. A unique, slotted MOLLE platform allows the user to weave the inner belt inside and outside the MOLLE panels to create a custom combination of belt and web attachment points. Once configured, a SureGrip backing grips the waist, providing a superior hold and a stable fit. Thick neoprene padding forms to the contours of the body, creating a comfortable fit that will not bruise or chafe skin. Four strategically placed suspender attachments offer further support and stability if needed. A removable HPDE stiffener increases rigidity to prevent sagging.
Our Duty line of pouches were designed for law enforcement use with direct input from law enforcement professionals. This simple pouch will hold two pairs of gloves, one in the front and another in the back pocket. • Mounts to both MOLLE and belts up to 2" with our new HSGI® Universal Clips • Built with proprietary heavy-duty nylon laminate • Secures with a button snap closure • Double-needle binding
Dimensions: 3"L x .75"W x 4.5"H, .093 lbs Metric: 7.62cm x 1.9cm x 11.43cm, 42.52 gCovered by HSGI's® Lifetime Warranty. Made in the USA.
