Our 2" Cop Lock Duty Belt is designed to work every day as a nylon tactical belt. This belt features a Cop Lock Buckle with third lock mechanism to prevent accidental release. • Constructed with 2" SCUBA webbing • Easily adjustable from either end with hook and loop fasteners• Two webbing belt keepers secure excess webbing• All loop fastener sewn down the middle for extra security*Use actual measurements and not pant size when picking your belt size*The sizes for our Duty Belts are based on each size's minimum and maximum lengths while maintaining full hook and loop connectivity. Although these are the recommended ranges for each size, these belts can reasonably adjust an additional 2 inches up and down.
Small – 34"-38"Medium – 39"-43"Large – 44"-48"XL – 49"-53"2X – 54"-58"3X - 59"-61"
Covered by HSGI's® Lifetime Warranty. Made in the USA.
The Shirt Shield V2 offers a varied design that has additional side protection. The side protection can be helpful for keeping the hook portion of many tourniquets away from clothing, car seats and other materials that might be damaged. The Shirt Shield comes with two longer screws to allow the Shield to be easily attached to the pouch. Made of 100% aircraft-grade Kydex®, the Shirt Shield comes in all the same colors as our popular Kydex® Tourniquet TACO®. To install, remove the top two screws holding the clips to the body of the TACO®and tighten.
Dimensions: 2.5"L x .125"W x 3.25"H, .018 lbsMetric: .98cm x .05cm x 1.28cm, 8.5 g
***We recommend treating the screws with Blue Locktite or clear nail polish to prevent the screws becoming loose.***
Introducing the ASP Tactical Mirror & Case - an essential tool for law enforcement officers. Clip it onto your extended ASP Baton to see around corners and safely clear rooms. Minimize risk of exposure to hidden needles during drug searches. Comes with a protective storage case. Enhance your safety and efficiency on the job with the Tactical Mirror & Case!
Compatible with F and T Series Batons
Ideal for room searches
Rapidly attaches to baton
This modular padded belt system is the next generation of the HSGI® padded belt family. All the performance of our original system, but at a lower weight and lower profile. Can be purchased as a stand alone sleeve or with a 1.5" COBRA® belt with inner loop fastener.• .75" thick and 3.25" tall• Neoprene padding creates a "gel-like" comfort• Adds a level of grip that is unlike any other low-profile belt system on the market• Two access ports at 3 and 9 o'clock positions for the attachment of subloads, such as holsters and drop platforms, directly to the interior belt• Assembled with a removable HDPE stiffener to add stability• Designed for use with a COBRA® 1.5" or 1.75" Rigger BeltCovered by HSGI's® Lifetime Warranty. Made in the USA.See the HSGI® Clips 101 video above at 1:45 for how to attach pouches to our Slim-Grip® using our HSGI® Clips.IF YOU WISH TO ORDER A 1.5" RIGGER BELT TO MATE WITH THE SLIM-GRIP® BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SLIM-GRIP® SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT.
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.Below is the total length of the SGPB for sizing:30.75" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Medium36.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Large41.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is XL46.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is 2X
The High Speed Gear® Sure-Grip® Padded Belt is designed to provide the comfortable, no-slip stability necessary for reducing back strain and general discomfort so frequently caused by loose-fitting, drooping and weighted-down belts. Featuring a brand-new modular system, the Sure-Grip® has a slim profile that is just 0.75 inches thick and only 4.25" tall.The Sure-Grip® Padded Belt's updated design features Neoprene as the belt's padding. This material gives the belt a cushiony "gel-like" feel for greater comfort and exceptional gripping power. It also features a removable HDPE stiffener sheet throughout the entire main portion where the three continuous rows of PALS/MOLLE are located. This feature is for those times when added stability is required. With this proprietary ability to remove the stiffener sheet, the Sure-Grip® is one of the most flexible military belts of its kind, making it the ultimate support system whether at the range or in the field.With three conveniently-positioned access ports, the Sure-Grip® allows you to seamlessly attach subloads to the belt's interior, while the belt's four suspender attachments allow for easy expansion.• .75" thick and 4.25" tall• Neoprene padding creates a "gel-like" comfort• Adds a level of grip that is unlike any other belt system on the market• Three access ports at 3, 6 and 9 o'clock positions for the attachment of subloads, such as holsters and drop platforms, directly to the interior belt• Features four strategically positioned suspender attachments• Assembled with a removable HDPE stiffener to add stabilityCovered by HSGI's® Lifetime Warranty. Made in the USA.IF YOU WISH TO ORDER A RIGGER BELT TO MATE WITH THE SGPB, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.Below is the total length of the SGPB for sizing:30.75" end to end - If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium36.25" end to end - If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large41.25" end to end - If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL46.25" end to end - If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X
Experience the ultimate in style and comfort with the 5.11 Tactical Flag Bearer MultiCam Cap. Made from enzyme-washed canvas, this premium cap offers lasting durability, lightweight comfort, and all-weather performance. Stand out with the large loop field on the front panel while staying cool and protected.
Stand tall and proud with the 5.11 Tactical Flag Bearer MultiCam Cap! Made with an integrated sweatband for cool and dry wear on hot days, and featuring a traditional six-panel design and Buckram front linings for a perfect fit, this cap is a must-have for any patriot!
This HSGI® version of a traditional duty belt uses a National Molding quick-release buckle on 2" webbing. • Constructed with 2" SCUBA webbing • Buckle color matches belt *Use actual measurements and not pant size when picking your belt size*The sizes for our Duty Belts are based on each size"„¢s minimum and maximum lengths while maintaining full hook and loop connectivity. Although these are the recommended ranges for each size, these belts can reasonably adjust an additional 2 inches up and down.Small – 34"-38"Medium – 39"-43"Large – 44"-48"XL – 49"-53"2X – 54"-58"3X - 59"-63"Covered by HSGI's® Lifetime Warranty. Made in the USA.
The .25"-thick Micro Grip Belt Panel turns any rigger belt or duty belt with interior hook or loop fastener into a padded belt. This liner removes the need for an inner belt and enables the user to wear the belt over layers of clothing securely and quickly. • Neoprene padding creates a "gel-like" comfort • Adds a level of grip that is unlike any other belt system on the market Available in 6 sizes: Small – 23" end to end Medium – 27" end to end Large – 31" end to end XL – 35" end to end 2X – 39" end to end (+$5 to $6) 3X – 43" end to end (+$5 to $6)
This slim, versatile padded belt system adds more options to the HSGI® padded belt family. The Duty-GripTM is constructed with a laser-cut proprietary heavy-duty nylon laminate. Designed with the patrol officer in mind, the Duty-GripTM was fielded by numerous law enforcement officers and departments. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The Duty-GripTMfeatures a complete series of vertical laser-cut slots that allow a rigger or duty belt to weave securely to expose any or nearly all of the belt for attaching belt-mounted pouches and holsters. Because of its unique design, paired inner belts don't require interior hook fastener. At 2.75" tall, the Duty-GripTM is our slimmest padded belt yet and is still compatible with belts up to 2". • Neoprene padding provides a "gel-like" comfort and unsurpassed grip• Vertical laser-cut slots for weaving and securing rigger or duty belt while still exposing most of the interior belt for attaching belt-mounted pouches and holsters, perfect for any duty rig• At 2.75" tall, the Duty-Grip™ is our slimmest padded belt yet Covered by HSGI's® Lifetime Warranty. Made in the USA. IF YOU WISH TO ORDER A COBRA® RIGGER BELT TO MATE WITH THE DUTY-GRIPTMBELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE DUTY-GRIPTM SIZE VS. THE RIGGER BELT SIZE TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS. FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT. ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. Below is the total length of the Duty-GripTM for sizing:30.5" end to end - If you choose a COBRA® belt for this Duty-GripTM, the smallestCOBRA® you should order is Medium36.5" end to end - If you choose a COBRA® belt for this Duty-GripTM, the smallestCOBRA® you should order is Large41.5" end to end - If you choose a COBRA® belt for this Duty-GripTM, the smallestCOBRA® you should order is XL47.5" end to end - If you choose a COBRA® belt for this Duty-GripTM, the smallestCOBRA® you should order is 2X
Detailed embroidered design Uniform friendly colors Durable reinforced edges
Nothing compares to American ingenuity and craftsmanship, which is why High Speed Gear manufacture all of their tactical equipment in the United States. This morale patch shows your support for American-made gear. It features the HSG logo set against a subdued, earth-toned version of the American flag that blends in with uniforms and tactical gear, and is available in olive drab or coyote brown. Its highly detailed embroidery makes it eyecatching and demonstrates its superior quality, and the roped edges make it durable as well. Its hook backing attaches easily to the loop surfaces found on tactical clothing and equipment.
Detailed embroidered design Uniform friendly colors Durable reinforced edges
High Speed Gear are famous for their selection of high-quality tactical pouches, vests, belts and other apparel and equipment, all made to rigorous standards of material quality and craftsmanship in the United States. Show your support for great American manufacturing with this logo patch. It features a starred and striped version of the HSG logo in two-tone coyote brown and black, with a highly detailed precision-cut embroidered shape. Its edges are reinforced to make it more durable. The patch can be attached to a wide range of tactical equipment for easy personalization.
Battle proven tactical belt utilizes the proven Cobra buckle on a 1.5 web Constructed to the same standards as our 1.75 Cobra belt but designed for those who need a belt for daily wear around the office or out in the field Excellent stiffness and rigidity will not allow the weight of holsters and mag pouches to roll the belt This version of the battle proven tactical belt utilizes the proven COBRA buckle on a 1.5 web with interior Velcro. The Velcro matches up with Slim Grip battle belts or with HSG belt mounted TACO magazine pouches. The belt is constructed to the same standards as our 1.75 Cobra belt. This belt's excellent stiffness and rigidity will not allow the weight of holsters and mag pouches to roll the belt.
*Use actual measurements and not pant size when picking your belt size*
