25% brighter than the previous version thanks to 14 LEDs.
25% longer average run time due to larger lithium-ion battery.
Waterproof with an IP68 rating. Tested to keep water out while submerged in nearly five feet of water for 30 minutes.
Magnetic base mount (included) now features a tether attachment, allowing you to add additional security to your light. Tether sold separately.
Long-range Visibility – Rated visibility up to 3+ miles using high-powered LEDs.
360° Lighting – 14 LEDs provide visibility on all sides, keeping you safe from all directions.
Magnet Mounting System – A built-in rare-Earth magnet (you know, the really strong ones) allows you to quickly attach the Micro to most metallic surfaces and works with all Guardian Angel mounts.
Work Light – A white work light on the front of Micros allows for hands-free work.
Top Light – Independently controlled light on the top of the Micro adds additional versatility.
Front/Rear controls – Front and Rear lights can be controlled independently.
Accessories – The Micro works with all Guardian Angel mounts and accessories, including many for sports and other activities.
Four Brightness Settings – Low, Medium, High & Max.
SOS Flash Pattern – Quick button hold sets device to SOS flash mode, ideal for emergency situations when you need to highlight your location
Safely transport and store your Guardian Angel devices and mounts with our protective carrying case! Able to hold up to 10 Elite devices or 14 Micro devices at once, this 9.5" x 6" hard case ensures your devices stay secure. Plus, the interior mesh pocket with zipper keeps cords and small mounts organized. Travel with confidence and peace of mind.
This versatile ordnance pouch can hold a wide variety of rounds and tools by expanding and contracting using our patented TACO® design. • Holds 40mm/37mm rounds, small radios like the BaoFeng UV-5R and other items securely • Constructed with heavy-duty nylon, durable webbing and shock cord • Metal grommet for drainage Comes in single and double configurations • MOLLE version includes HSGI® Clips for attachment to MOLLE or PALS• ABM version can mount to belts up to 2.25" Covered by HSGI's® Lifetime Warranty. Made in the USA. High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
For enhanced comfort while wearing plate carriers and chest rigs Will adapt to any webbing shoulder strap up to 2 in width Perfect upgrade for the USMC SPC or most plate carriers Shoulders pads will add a thin soft gel-like padding to help manage the load
For enhanced comfort while wearing plate carriers and chest rigs. Will adapt to any webbing shoulder strap up to 2 in width. Perfect upgrade for the USMC SPC or most plate carriers. These shoulder pads will add a thin soft gel-like padding to help manage the load. Made of 1000 denier Cordura and 6.5mm neoprene.
The AMP is a versatile, double-ended pouch that works perfectly as a small IFAK pouch or as a general-purpose pouch. The AMP fits medical supplies, two 5.56 magazines, a poncho or other similarly-sized items. • Built with heavy-duty nylon • Dual opening allows easy access from both ends • Can be mounted vertically on MOLLE and either vertically or horizontally on belts • Pull tab assists in removing contents • Features adjustable shock cord for compression of contents or external attachment of items • Closures secure with an adjustable 1" side-release buckle • Large loop fastener panel underneath closure flaps features two separate silencing panels, enabling one or both flaps to secure with hook and loop, or with only the buckle • External loop fastener panels for attachment of label patches • Features laser-cut MOLLE sides for attachment of additional items This product is member tested and recommended by the National Tactical Officers Association (NTOA). Covered by HSGI's® Lifetime Warranty. Made in the USA. HSGI® Long Clips included.
This MOLLE-mountable, heavy-duty nylon holster was designed to work with most full-size semiautomatic handguns. This holster may not be compatible with after-market attachments.MOLLE webbing on the front and back allows the holster to be attached on either side for both left- and right-handed shootersFeatures a removable bungee retention tab and adjustable thumb break, which can be configured for ambidextrous useFeatures double-needle edge binding on all edges Includes one long and one short HSGI® Clip for attachment to PALS Covered by HSGI's® Lifetime Warranty. Made in the USA. Disclaimer: High Speed Gear® products are constructed to fit standard factory equipped guns only. Additions such as trigger shoes, extended slide releases, laser sights or any alteration to the frame or external dimensions of the gun itself may render the holster unsafe and increase the risk of an accidental discharge. At no time should a handgun other than the size for which the holster is made be used in an HSGI® holster. It is the user's sole responsibility throughout the serviceable life of the holster to personally check for proper fit and retention with an unloaded handgun. If any HSGI® product becomes worn, loose or ill-fitting with age, you should cease use immediately. Because HSGI® and Comp-Tac® have no control over how their holsters and/or accessories will be used, or who they will be used by after their purchase, we disclaim any and all liability for incidental or consequential damages to person(s) and/or property resulting from the use of any HSGI® or Comp-Tac® product, including wear on firearm finish.
Front panel efficiently constructed to provide three rows and six columns of PALS Stiffener provides solid performance HSGI small H-Harness is included for wear without plate carrier
The High Speed Gear Chest Rig features three rows and eight columns of PALS and a side opening for maps or paperwork. An High Speed Gear H Harness is including to provide better support over an X Back found on most chest rigs. A Velcro hook panel is installed on the back to make integration with plate carrier systems and a sewn in carry handle allows you to grab and go if you need to be moving right now. Add 3TACO Magazine Pouches and a Bleeder/Blowout Pouch and you have a setup that should match any need.
Designed in conjunction with Fire Fighters and EMS, the Apex ER Sling is constructed from a durable Cordura laminate and nanosphere coated tubular nylon webbing. The user can choose between a traditional black color scheme or opt for ANSI certified reflective binding for better low-light visibility. The sling uses HSG’s patented Double Tap Slider allowing the user to adjust the ride height. Included is a 3 column rigid kydex MOLLE panel designed to fit almost every radio/radio pouch used by EMS and Fire Fighters.
- 1000D/500D shoulder pad for durability and comfort
- ANSI certified reflective binding color option available
- 3 column aircraft grade kydex MOLLE panel
- Included belt loop tether
- Integrated PTT cable management loops with snaps for ease of use
- Adjustable length using the patented HSG Double Tap Slider to adjust fit between heavy firefighting equipment and regular EMS uniforms
- Metal hardware for added durability
- Proudly made in the USA
Contractor style cap that has no company logo or country flag Made entirely in the USA Features a 2x3.5 loop panel on the front, one 1x3 loop panel on the rear, one 1x1 loop panel on the crown
The HSGI Tactical Baseball Cap-Sterile is a contractor style cap that has no company logo or country flag. It features a Velcro adjustable elastic head strap to fit the small to x-large sizes.
Designed to hold medical gear and grant immediate access to medical shears Medical shears are held securely by strap and snap in separate open compartment Main pouch utilizes 2 wide QUICK-PULL interior strap to aid in one handed removal of pouch contents MOLLE/PALS webbing on sides for additional modular pouches or the attachment of a tourniquet
Designed to hold medical gear and grant immediate access to medical shears. Medical shears are held securely by strap and snap in separate open compartment. Main pouch utilizes 2 wide QUICK-PULL interior strap to aid in one handed removal of pouch contents.
The Bonito 15 ft Tracking Lead is designed specifically for K-9 and working dog handlers. Constructed with Mil-Spec tubular nylon using Schoeller™ Nanoshpere™ coating, the Bonito 15 ft Tracking Lead is water and fur resistant. The handle as well as the steel snap-hook with military-grade coating is double bar-tacked for durability. The Bonito 15 ft Tracking Lead is made in the USA and extends a total of 15 feet in length. • Mil-spec tubular nylon construction• Schoeller™ Nanosphere™ coating provides water and fur resistance• Steel snap-hook with military-grade coating• 15ft extended length• Made in the USA
Allows for attaching to larger HSG pouches like M3T to platforms with ease Tapered leading edge and very slight width adjustment Final attachment step is a breeze as the clip passes through itself before snapping
High Speed Gear HSG Clips allow you to attach your gear to M3T platforms now. Use these easy but effective clips to attach your gear to M3T and PALS systems. A new tapered leading edge makes weaving them through even easier.
