Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place. • Constructed with two layers of 1.75" Type 13 webbing • Sewn together with five rows of bonded 138 nylon thread • Additional rigidity and stiffness are added with a proprietary adhesive before sewing • Buckle color matches belt (IDR buckle is always black) *Use actual measurements and not pant size when picking your belt size* Small – 28"-30" Medium – 32"-34" Large – 36"-38" XL – 40"-42" 2X – 44"-46" 3X – 48"-50" Covered by HSGI's® Lifetime Warranty. Made in the USA. **HSGI's® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
Our popular phone wallet has been updated for today's phones and is available in three sizes, which vary by approximately .25" in width and height. Constructed from double-layered, laminated heavy-duty nylon, this pouch is durable and moisture-resistant. Due to its unique design, this pouch can expand to better accommodate your device. The iTACO® V2 also features four pockets for cards, cash and other small essentials. The V2 is available in both PALS- and belt-mountable versions.Constructed from double-layered, laminated heavy-duty nylon Moisture-resistant Expands to better accommodate your device Small iTACO fits iPhone 8 Plus, Galaxy S8 Plus and largerLarge fits most phones in most protective casesX Large fits iPhone XS Max and larger Samsung phones MOLLE version includes HSGI® Clips ABM version can mount to belts up to 2.25"Covered by HSGI's® Lifetime Warranty. Made in the USA. Disclaimer: This is a pouch, not a protective case. HSGI® is not liable for any damages to your device while using this product.SmallDimensions: 3.5"L x .75"W x 5.5"H, .14 lbsMetric: 8.89cm x 1.91cm x 13.97cm, 66 gLarge (+$2)Dimensions: 3.75"L x .75"W x 5.875"H, .15 lbsMetric: 9.52cm x 1.91cm x 14.92cm, 68 gXL (+$4)Dimensions: 3.875”L x .75”W x 6.75”H, .22 lbsMetric: 9.84cm x 1.91cm x 17.14cm, 99.22 gHigh Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
Our Duty line of TACOs® functions the same as the originals, but feature sleeker fronts and hidden bungee, which is woven internally. This double pouch will hold most pistol-caliber magazines, small flashlights, pocket knives, multitools, handcuffs, field compasses, tins and more. • Mounts to both MOLLE and belts up to 2" with our new HSGI® Universal Clips • Proprietary heavy-duty nylon laminate, shock cord, and polymer brackets provide versatility in size • Tapered, protruding brackets enable quick and easy indexing and reinsertion of items or magazines Covered by HSGI's® Lifetime Warranty. Made in the USA. Patent #9,759,536
Designed for HSGI belt mount pouch system Constructed of 2 layers of 1.75 type 13 webbing sewn together with 5 rows of bonded 138 nylon thread Layers are laminated with an industrial strength adhesive before sewing
The HSGI Cobra Rigger's Belt is built to withstand the harshest use. Engineered to perform in the most austere environments, the Cobra Rigger's Belt is constructed of 2 layers of Type 13 webbing and is laminated with industrial adhesive to provide additional rigidity and stiffness. Equipped with the quick-release COBRA buckle, this belt can be donned and doffed quickly, at a moments notice. In service with military and police units worldwide, the rigger's belt is a proven piece of gear that no true operator should be without.
Constructed with a laser-cut Design allows inner belts to be woven under and over the MOLLE panels Rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort
The Laser Sure-Grip Padded Belt is the newer design of the old class Sure Grip Padded Belt with Laser cut 1000D Cordura to provide the end user with a comfortable, stable and versatile belt system. The laser cutting allows the belt to be ten percent lighter than previous sure grip belts. The Neoprene padding creates a gel like comfort, which eliminates hard points and prevents gear from digging into the hips. To allow gear-specific customization, an inner belt can be woven inside or outside of the MOLLE/PALS webbing platforms to allow the use of MOLLE/PALS for pouches or the belt itself for holsters and other accessories. For added rigidity, the Laser Sure-Grip Padded Belt is assembled with an HPDE stiffener. The Laser Sure Grip Padded Belt is one of the thinnest and toughest belts on the market.
Constructed with a laser-cut Design allows inner belts to be woven under and over the MOLLE panels Rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort
The Laser Sure-Grip Padded Belt is the newer design of the old class Sure Grip Padded Belt with Laser cut 1000D Cordura to provide the end user with a comfortable, stable and versatile belt system. The laser cutting allows the belt to be ten percent lighter than previous sure grip belts. The Neoprene padding creates a gel like comfort, which eliminates hard points and prevents gear from digging into the hips. To allow gear-specific customization, an inner belt can be woven inside or outside of the MOLLE/PALS webbing platforms to allow the use of MOLLE/PALS for pouches or the belt itself for holsters and other accessories. For added rigidity, the Laser Sure-Grip Padded Belt is assembled with an HPDE stiffener. The Laser Sure Grip Padded Belt is one of the thinnest and toughest belts on the market.
Designed for HSGI belt mount pouch system Constructed of 2 layers of 1.75 type 13 webbing sewn together with 5 rows of bonded 138 nylon thread Layers are laminated with an industrial strength adhesive before sewing
Carry gear with pride and confidence using the Cobra Rigger Belt from High Speed Gear. Designed to offer maximum durability, the belt features a unique reinforced construction for unparalleled strength. Two layers of military-grade type 13 webbing create a robust base that is guaranteed to hold as much gear as the user can attach. The webbing is meticulously stitched together with five rows of high-test 138 nylon thread for a bond that will not separate or come apart. An industrial-strength laminate increases the Cobra Rigger Belt's rigidity for added support and strength. Engineered for versatile tactical use, internal loop patches offer superior securement of holsters, magazine pouches and other belt-mounted gear. A specialized quick-release buckle allows for rapid removal and speedy deployment of the belt.
Designed for HSGI belt mount pouch system Constructed of 2 layers of 1.75 type 13 webbing sewn together with 5 rows of bonded 138 nylon thread Layers are laminated with an industrial strength adhesive before sewing
The HSGI Cobra Rigger's Belt is built to withstand the harshest use. Engineered to perform in the most austere environments, the Cobra Rigger's Belt is constructed of 2 layers of Type 13 webbing and is laminated with industrial adhesive to provide additional rigidity and stiffness. Equipped with the quick-release COBRA buckle, this belt can be donned and doffed quickly, at a moments notice. In service with military and police units worldwide, the rigger's belt is a proven piece of gear that no true operator should be without.
This versatile pouch will securely hold almost any high-capacity pistol or submachine gun magazine. • Most high-capacity pistol and submachine gun magazines are held securely, deployed easily, and silently on demand• Also fits large flashlights, collapsible batons, and other survival equipment • MOLLE version includes HSGI® Clips for attachment to MOLLE or PALS• ABM version can mount to belts up to 2.25"
Dimensions: 1.5"L x 1"W x 6"H, .16 lbs Metric: 3.81cm x 2.54cm x 15.24cm, 72.57 g
Covered by HSGI's® Lifetime Warranty. Made in the USA. Patent #9,759,536 High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
Designed for HSGI belt mount pouch system Constructed of 2 layers of 1.75 type 13 webbing sewn together with 5 rows of bonded 138 nylon thread Layers are laminated with an industrial strength adhesive before sewing
Carry gear with pride and confidence using the Cobra Rigger Belt from High Speed Gear. Designed to offer maximum durability, the belt features a unique reinforced construction for unparalleled strength. Two layers of military-grade type 13 webbing create a robust base that is guaranteed to hold as much gear as the user can attach. The webbing is meticulously stitched together with five rows of high-test 138 nylon thread for a bond that will not separate or come apart. An industrial-strength laminate increases the Cobra Rigger Belt's rigidity for added support and strength. Engineered for versatile tactical use, internal loop patches offer superior securement of holsters, magazine pouches and other belt-mounted gear. A specialized quick-release buckle allows for rapid removal and speedy deployment of the belt.
Built with heavy-duty nylon, double-needle binding, and bar-tack reinforcement at stress points Utilizes a 1 side release buckle closure with optional hook and loop fastener backup and hook and loop silencing flap Features six columns of laser-cut MOLLE across front and sides for attachment of small pouches Includes adjustable shock cord to cinch down opening, as well as removable shoulder strap
Designed to hold medical gear and grant immediate access to medical shears Medical shears are held securely by strap and snap in separate open compartment Main pouch utilizes 2 wide QUICK-PULL interior strap to aid in one handed removal of pouch contents MOLLE/PALS webbing on sides for additional modular pouches or the attachment of a tourniquet
Designed to hold medical gear and grant immediate access to medical shears. Medical shears are held securely by strap and snap in separate open compartment. Main pouch utilizes 2 wide QUICK-PULL interior strap to aid in one handed removal of pouch contents.
