The Gas Mask/Spent Mag Pouch V2 can be used as a gas mask pouch or dump pouch, and can be worn as a drop leg or with a shoulder strap. • Holds up to the largest popular tactical gas mask models • Both the drop leg components and shoulder strap are easily removed for full conversion to either carry style This product is member tested and recommended by the National Tactical Officers Association (NTOA).
Dimensions: 10"L x 4"W x 12"H, 1 lbs (480 cubic in)Metric: 25.4cm x 10.16cm x 30.48cm, 453.59 g (7,865.8 cubic cm)
Covered by HSGI's® Lifetime Warranty. Made in the USA.
The Mag-Net™ Dump Pouch V2 is constructed with laminated, heavy-duty nylon and heavy-duty 10 oz. mesh (7.5 oz. mesh for MultiCam®). • Allows full visibility of pouch contents • Provides maximum drainage of water or sand • Structured top provides flexibility, and easy access, with magnet closure• Pouch deploys with one pull on the tab• MOLLE version includes HSGI® • Clips for attachment to MOLLE or PALS • ABM version can mount to belts up to 2.25" This product is member tested and recommended by the National Tactical Officers Association (NTOA). Covered by HSGI's® Lifetime Warranty. Made in the USA. High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
This general-purpose pouch is designed to integrate with the rest of our Pack Build System, but is also perfect for forward observers and other similar applications. Our Pack Build System features different bags designed to build on top of each other for a myriad of options.• Built with heavy-duty nylon• Features large outer pocket on front side • One large, two medium, two small and four pen-sized nylon pockets • Two layered, zipper-closure mesh pockets • Features .75" nylon webbing lanyard with snap closure to secure keys and other items • Adjustable parachute cord suspension system• Designed to integrate with our Day Pack • Features double- and single-needle bindingCovered by HSGI's® Lifetime Warranty. Made in the USA. HSGI® Clips included.
.75'' thick and 3.25'' tall Neoprene padding Four suspender attachments Made in the USA
This slim, versatile modular padded belt system adds more options the HSGI padded belt family. All the performance of the original system, but at a lower weight and lower profile. Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
Front panel efficiently constructed to provide three rows and six columns of PALS Stiffener provides solid performance HSGI small H-Harness is included for wear without plate carrier
The SPC Chest Platform was created as a slick, low-profile solution to for those who need only the essentials. Designed to be worn as a stand alone piece of kit by using the H-harness, the Chest Platform can also be quickly integrated into the SPC Slick Plate carrier or similar plate carriers on the market. The Chest Platform allows the user to go from low-profile to mission ready in seconds.
This MOLLE shingle will keep up to three rifle and three pistol magazines secure and readily available. The three Double Decker® TACO® pouches are permanently secured to a laser-cut laminate base ensuring easy and stable mounting on any PALS platform, such as vests, plate carriers and battle belts. Each Double Decker® can hold almost any combination of magazines, HSGI® Shot Shell Trays, flashlights, multitools and many other similar sized items. • Securely holds most rifle and pistol magazines• Magazines deploy easily and silently on demand• Strip of loop fastener sewn inside each pouch for additional contact and grip
Dimensions: 10"L x 1.75"W x 5"H, .78 lbs Metric: 25.4cm x 4.44cm x 12.7cm, 357.2 gCovered by HSGI's® Lifetime Warranty. Made in the USA. Patent #9,759,536
Our 2" Cop Lock Duty Belt is designed to work every day as a nylon tactical belt. This belt features a Cop Lock Buckle with third lock mechanism to prevent accidental release. • Constructed with 2" SCUBA webbing • Easily adjustable from either end with hook and loop fasteners• Two webbing belt keepers secure excess webbing• All loop fastener sewn down the middle for extra security*Use actual measurements and not pant size when picking your belt size*The sizes for our Duty Belts are based on each size's minimum and maximum lengths while maintaining full hook and loop connectivity. Although these are the recommended ranges for each size, these belts can reasonably adjust an additional 2 inches up and down.
Small – 34"-38"Medium – 39"-43"Large – 44"-48"XL – 49"-53"2X – 54"-58"3X - 59"-61"
Covered by HSGI's® Lifetime Warranty. Made in the USA.
The Shirt Shield V2 offers a varied design that has additional side protection. The side protection can be helpful for keeping the hook portion of many tourniquets away from clothing, car seats and other materials that might be damaged. The Shirt Shield comes with two longer screws to allow the Shield to be easily attached to the pouch. Made of 100% aircraft-grade Kydex®, the Shirt Shield comes in all the same colors as our popular Kydex® Tourniquet TACO®. To install, remove the top two screws holding the clips to the body of the TACO®and tighten.
Dimensions: 2.5"L x .125"W x 3.25"H, .018 lbsMetric: .98cm x .05cm x 1.28cm, 8.5 g
***We recommend treating the screws with Blue Locktite or clear nail polish to prevent the screws becoming loose.***
Duty line of TACOs® functions the same as the originals, but feature sleeker fronts and hidden bungee, which is woven internally. This pouch will hold most handheld radios and issued personal communications devices. • Open sides allow for quick access to equipment controls • Mounts to both MOLLE and belts up to 2" with our new HSGI® Universal Clips • Proprietary heavy-duty nylon laminate, shock cord, and webbing provide versatility in size and adjustable retention • Bungee retention tab offers additional retention • Soft sides for a formed fit Covered by HSGI's® Lifetime Warranty. Made in the USA.
Designed for HSGI belt mount pouch system Constructed of 2 layers of 1.75 type 13 webbing sewn together with 5 rows of bonded 138 nylon thread Layers are laminated with an industrial strength adhesive before sewing
Carry gear with pride and confidence using the Cobra Rigger Belt from High Speed Gear. Designed to offer maximum durability, the belt features a unique reinforced construction for unparalleled strength. Two layers of military-grade type 13 webbing create a robust base that is guaranteed to hold as much gear as the user can attach. The webbing is meticulously stitched together with five rows of high-test 138 nylon thread for a bond that will not separate or come apart. An industrial-strength laminate increases the Cobra Rigger Belt's rigidity for added support and strength. Engineered for versatile tactical use, internal loop patches offer superior securement of holsters, magazine pouches and other belt-mounted gear. A specialized quick-release buckle allows for rapid removal and speedy deployment of the belt.
Our Duty line of TACOs® functions the same as the originals, but feature sleeker fronts and hidden bungee, which is woven internally. This pouch will hold most handcuffs, field compasses, tins and more. Available in single and double configurations. • Mounts to both MOLLE and belts up to 2" with our new HSGI® Universal Clips • Proprietary heavy-duty nylon laminate, shock cord, and webbing provides versatility in size and adjustable retention • Secures with adjustable and removable button snap strap • Double configuration features a nylon to separate cuffs and enable one set to be removed without pulling out the other • Soft sides for a formed fit
Single Dimensions: 3.5"L x 1.5"W x 3.5"H, .154 lbs Metric: 8.89cm x 3.81cm x 8.89cm, 70 g Double Dimensions: 3.5"L x 2.5"W x 3.5"H, .205 lbs Metric: 8.89cm x 6.35cm x 8.89cm, 93 gCovered by HSGI's® Lifetime Warranty. Made in the USA.
This covered handcuff pouch will hold almost any brand or style of handcuffs, including oversized cuffs. The body and flap are a single, solid piece of heavy-duty nylon. • Fits chained and hinged cuffs • Perfect for field compasses and small tins • Features our patented TACO® design for adjustable retention and adjustability• MOLLE version includes HSGI® Clips for attachment to MOLLE or PALS• ABM version can mount to belts up to 2.25"
Dimensions: 3"L x 1.75"W x 5.5"H, .175 lbs Metric: 7.62cm x 4.45cm x 13.97cm, 79.37 g
Covered by HSGI's® Lifetime Warranty. Made in the USA. High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt
