Join as Seller HSG: Slim-Grip Padded Belt – A1 Gear LLC

HSG: Slim-Grip Padded Belt

Description

This modular padded belt system is the next generation of the HSGI® padded belt family. All the performance of our original system, but at a lower weight and lower profile. Can be purchased as a stand alone sleeve or with a 1.5" COBRA® belt with inner loop fastener.

• .75" thick and 3.25" tall
• Neoprene padding creates a "gel-like" comfort
• Adds a level of grip that is unlike any other low-profile belt system on the market
• Two access ports at 3 and 9 o'clock positions for the attachment of subloads, such as holsters and drop platforms, directly to the interior belt
• Assembled with a removable HDPE stiffener to add stability
• Designed for use with a COBRA® 1.5" or 1.75" Rigger Belt


Covered by HSGI's® Lifetime Warranty. Made in the USA.

See the HSGI® Clips 101 video above at 1:45 for how to attach pouches to our Slim-Grip® using our HSGI® Clips.


IF YOU WISH TO ORDER A 1.5" RIGGER BELT TO MATE WITH THE SLIM-GRIP® BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL  AND DELIBERATE WHEN SELECTING THE SLIM-GRIP® SIZE VS. THE RIGGER BELT SIZE

TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.

  1. FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
  2. ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
  3. FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT.

Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

Below is the total length of the SGPB for sizing:
30.75" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Medium
36.25" end to end -  If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Large
41.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is XL
46.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is 2X
Fiche produit

This modular padded belt system is the next generation of the HSGI® padded belt family. All the performance of our... En savoir plus

SKU: HSG-31SPB0BK
Code-barres: 849954010754

Rupture de stock

$99.00 Excl. T.V.A.

      Description

      This modular padded belt system is the next generation of the HSGI® padded belt family. All the performance of our original system, but at a lower weight and lower profile. Can be purchased as a stand alone sleeve or with a 1.5" COBRA® belt with inner loop fastener.

      • .75" thick and 3.25" tall
      • Neoprene padding creates a "gel-like" comfort
      • Adds a level of grip that is unlike any other low-profile belt system on the market
      • Two access ports at 3 and 9 o'clock positions for the attachment of subloads, such as holsters and drop platforms, directly to the interior belt
      • Assembled with a removable HDPE stiffener to add stability
      • Designed for use with a COBRA® 1.5" or 1.75" Rigger Belt


      Covered by HSGI's® Lifetime Warranty. Made in the USA.

      See the HSGI® Clips 101 video above at 1:45 for how to attach pouches to our Slim-Grip® using our HSGI® Clips.


      IF YOU WISH TO ORDER A 1.5" RIGGER BELT TO MATE WITH THE SLIM-GRIP® BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL  AND DELIBERATE WHEN SELECTING THE SLIM-GRIP® SIZE VS. THE RIGGER BELT SIZE

      TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.

      1. FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
      2. ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
      3. FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT.

      Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

      Below is the total length of the SGPB for sizing:
      30.75" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Medium
      36.25" end to end -  If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Large
      41.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is XL
      46.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is 2X

      Recently viewed products

      Connexion

      Vous avez oublié votre mot de passe ?

      Vous n'avez pas encore de compte ?
      Créer un compte